|Group||Motorcycle brake pads|
|Price||US $1.95-4.99 / set|
|Min. Order||1000 set|
|Terms of Payment||D/P, Western Union, T/T|
|Material||Semi-metallic, asbestos free|
|Service life||9000-30000KM according to road condition and using habit|
|production permit NO||XK08-003-00031|
|slots||can be customized|
YL-F032 motorcycle brake pad for DX 50; BWS; 3YK; WUYANG-WY 50 QT; LIFAN-LF 50 QGY; HERO HONDA-Nipster 50; DAELIM-DX 50 D Camper/ST 90 Pro Monkey; SUPERBYKE-M-Ped 50 Road Classic; YAMAHA-CR-Z 50/CY 50 RS Jog R/YW 100 T Booster BWs; P.G.O-EPS/Big Max 50; QUADZILLAWK 125/WK 110; SINNIS-Jet 50 QM 50;
9000-20000 KM accordingly
1000 sets, if stock available, it depends.
Semi-metallic, non-asbestos ;
ISO 9001, SGS test report
Product features :
1) High friction coefficient, steady brake performance
2) Low wear rate and very durable
3)Low noise and comfortable " brake feel "
4) Disc friendly
5) No asbestos
WE ARE A FACTORY, SOURCE OF MOTORCYCLE BRAKE PADS.
Install instruction for ome brake pad as follow:
1.Brake pads should always be fitted by a competent mechanic in accordance with the OEM
specifications. If in doubt, contact your local authorised dealer.
2.Once correctly fit your pads will need 'bedding in', this process should be started with light use
(except in emergency conditions) until good contact between the pads and discs has been achieved.
3.This process usually takes no more than the first 100 miles.
1.Keep your chips and disk clean off oil,dirt and other pollutants.
2.Make sure that there are sufficient overlap between the surface pastilles brake and disc brake.
1.Brakes should be checked before each use and inspected on a weekly basis.
2.Replace pads when the friction material reach 2 mm thickness or pads become scored or damaged.